|
PowerLink
|
Metrologic has introduced its PowerLink cables to all of its most recent products. Affording ease of use, the cables come in three different versions according to the scanner type and application:
- 2,7m coiled
- 2,1m straight
- 1,5m straight
In addition, these standard power supply cables are available with hundreds
of different pin-out/connector interfaces ensuring that the scanners are compatible with your IT systems.
|
 |
|
Making a connection
|
|
Each PowerLink cable is equipped with a 10-pin RJ45 plug. Simply plug the 10-pin RJ45 connector into the jack on the Metrologic product: you will hear it "click" as the connection is made. If the end-user needs to remove the cable, place a pin or paperclip into the small hole located underneath the unit. With an easy tug, the cable will slide out of the scanner.
|
|
|
What products are PowerLink compatible ?
|
|
All new Metrologic hand-held and presentation scanners are PowerLink compatible: Voyager, Orbit, Cubit/Plus, ArgusScan, InVista and Horizon
|
|
|
What is the AC input voltage of the PowerLink power supplies ?
|
|
The following power supplies are available: 220V AC Europe, Part No. 45-45591; 240 AC UK, Part No: 45-45592
|
|
|
